Z-Gard® DS Sensor

The Z-Gard DS Sensor is designed to detect the presence of carbon monoxide and nitrogen dioxide gases in parking garages, vehicle storage areas or wherever else these two toxic gases could be found.

These sensors employ electrochemical sensors which generate a representative output signal proportional to the calibrated operating range. All Z-Gard DS Sensors are available with 2 output versions, a 4-20mA analog output, or an addressable RS-485 digital signal. Z-Gard Sensors with RS-485 digital output are specifically designed to operate as a system with any Z-Gard CXII or C 485 Controller. Z-Gard Sensors with 4-20mA can be installed as stand-alone sensors typically integrated with the Z-Gard C Controller, or common commercial equipment including PLC, DCS, or building automation systems.

  • 2 sensor output options: 4-20mA analog output or RS-485 digital signal.
  • Sensor status is shown by green OK LED, indicating proper device operation.
  • Switch drive output to percentages of full-scale. This feature is useful for testing remote devices which may be connected to the sensor output.
  • Easy one-person calibration of zero and span.


Standard
10063811
10063811

Z Gard DS CO 100 ppm EChem, NO2 10ppm Echem, Metal Encl, 4-20mA

10063812
10063812

Z Gard DS CO 100 ppm EChem, NO2 10ppm Echem, Metal Encl, RS 485

10070240
10070240

Z Gard DS CO 100 ppm EChem, NO2 10ppm Echem, Metal Encl, Apogee

cCSAus C22.2 NO. 61010-1; Fire, Shock and Safety

ENTELA (to CSA Standards)